How to use the extruded netting efficiently and which building support fit it best.
Beans are one of the most fruitful crops you can cultivate; giving them solid support is important. When they are growing up at first, they will be small and faint but when the vines are gradually coming up, then it is necessary to net. Netting allows plants to grow freer without limitation because of its holes.
Since bean can have thin haulms, long haulms or no haulms at all, instead of leaving them on the ground to rot, it’s important to enable them to grow in the air, the only suitable way to assist them to grow is through the Extruded netting.
The advantage of using the lattice net over the bean crop is that the mesh allows the plant to grow freely.
Support netting for beans does involve more effort than bush beans since it must be brought up. Learning how to net beans is simple. Let us take a look at the process.
Materials to Use
Before netting, you have to build a support for your beans. When building supports for climbing plants, you must know which materials to use. These are the most common selections:
Netting: Most of the netting can be used to stalk up beans. However, nets with smaller holes will make it difficult to remove the dead stems after the season. Extruded Netting has a large weave and it is simple to drape above a structure of poles.
Shade cloth: This is a material that helps shelters plants from direct sunlight and provides greater freshening, increases light diffusion. It is simple to remove and install
Bamboos: Bamboo canes are used because it is perfectly upright and has long lengths. Also, they are weather resistant and can last many years. However, if you can’t it (bamboos) yourself, then you have to import it, preferably from China. Though, it might be a bit expensive.
Before placing the net, support must be placed for climbing plants, wooden stakes or bamboo can be used.
Branches from Trees and Spare Sticks: You can make use of branches gotten from trees or sticks from your farm. Though it has a disadvantage, most branches or sticks are not straight and could be difficult to join together to get strong a structure.
Materials recycled: In farms, discarded building materials like steel rebar are sometimes used because it is easy to send to the ground. Unused timbers can be recycled into strong frames.
Fencing: Any type of wire fencing may be used for supporting plants provided it is strong enough. If you already have wire fencing across the edge of the farm, it is a wonderful support. If not, reused fencing together with strong poles can be put to a great use.
String: On the other hand, the garden string can also be used if it is knotted perfectly and must not cut off during bad weather.
Wire: It must be very strong; the wire is wonderful for temporary erections, that is, a structure that can be carried around the farm.
Which Supports should I choose?
When all the materials are gotten, it is time to start erecting. We have various kinds of structure:
Double row: This standard erection enables you to plant beans in rows and which are afoot from one another and you put sticks on each side, binding them at the peak with string.
Other materials used to create support are tree branches, recycled materials, rope or raffia or wire.
Arch: This has one of the most beautiful designs, particularly when beans are flowering, Arches could be expensive to create and unless the beans can be moved. Attractive steel arches can be purchased from many gardening suppliers and stores.
Wigwam: When planning this kind of support, you put plants in a circle along with the sticks maybe knotted at the peak or are attached to a stick ring. Use of this may be good-looking and add power in all ways. Though, the floor in the center of this support maybe lost unless there is a rapid growth in crops that are planted there.
Wall or Fence: plants such as beans need where they could wind their vines. Planting them on a solid fence require a net to be fitted to it. But make sure the location gets at least 4hours to 5 hours of sunshine each day.
Central Support: Central Support and wigwam structure are almost similar. Mostly, a strong pole is usually an anchor for several sizes of thread radiating over to pegs and sent into the earth. This ought to be solid in other to support the vines.
After choosing the building support you want, it is time to go for your netting. Extruded Netting remains one of the best support netting for beans.
This netting can be used in many aspects. It is perfect for farm produces like beans, cucumbers, tomatoes, and squash. It does not only help in supporting plants; it also provides the growing area with more space can improve yield when harvesting.
Already after building the chosen support, the extruded mesh can already be placed.
There are several ways to use Extruded netting
Vertical Position
This is the best method for beans. In the vertical position, plants are stretched between bamboo canes, two garden poles or anchor stakes. With these, climbing plants are spread out which enables them to grow, get sun exposure and maximum air without getting twisted. Fixing this netting in a vertical position can also aid easy growth against attractive surfaces like landscaping structures. Garden walls, and fences,
A-Frame Ground Position
Vertical support is the best method to support beans with extruded mesh.
Plants like cucumbers, squash, melons, tomatoes, and gourds, grow uprightly, but they take too much ground space. To manage this, construct this netting and garden poles into an A-frame shape and make it diagonal to the floor. This will provide light exposure, more air to plants and generate more space.
Ornamental Arrangements
Ornamental climbing plants, like climbing roses, ivy, sweet peas, and other flowers can be put attractively against a fence, or landscaping feature, and wall, by making the netting bigger over the surface and safeguarding it on the sides with garden canes or anchor poles.
After netting, you might also need to cover. Metal wire and poles can be used to support as shade cloth above the rising crops to a top where the crops can’t reach easily.
The benefit of acquiring the extruded mesh is that it manages the crop space.
Extruded netting is made of polypropylene mesh that is gotten in rolls. It is long-lasting and soft enough to avoid damage to delicate plants. It is made with both larger and smaller holes. For good results, pick the netting with wide openings to create easy access for harvesting and maintaining plants.